You can buy replacement parts from Go Karts Direct or if you are building your own go-kart as a project then you will find all the parts you need below
We can supply parts to anywhere in New Zealand.
Use our shopping cart facility below to order bikes, karts, parts and accessories or get in touch with us if you have any questions.
Got a query? Get in touch with the Go Karts Direct team who will be happy to help you.
Click images to enlarge
8cm distance between 3 stud holes which are 10mm.
Inside diameter is 25mm with splines.
These are compatible with our Rear Axles 880mm & 980mm with splines. OD of flange is 104mm. Height of Rear Wheel hub is 45mm
Rear wheel hubs for Drifta Go Karts, Grass Karts, Drift Trikes , Trolley's or ideal for any DIY project.
Price: $30.00
Click images to enlarge
Front wheel hubs complete with bearing.
ID of bearing is 17mm.
80mm distance between 3 stud holes which are 10mm. These are compatible with our Front connecting arms with a 17mm shaft. OD of flange is 104mm. Height of Front Wheel Hub is 45mm
Ideal for Drifta Go Karts, Grass Karts, Drift Trikes , Trolley's or ideal for any DIY project.
These are good quality one piece fittings.
Price: $35.00
Click images to enlarge
Bearing to suit Front wheel hub (as shown above)
Code: 6003
ID of bearing is 17mm
OD of bearing is 34mm
Price: $12.00
Click images to enlarge
To suit our Drifta single seater Go Kart Wheel Hubs
12 x 10mm bolts 25mm long
12 x flat washers
12 x spring washers
12 x locking nuts
Price: $19.90
Click images to enlarge
To suit our Drifta single seater Go Kart Wheel Hubs
3 x 10mm bolts 25mm long
3 x flat washers
3 x spring washers
3 x locking nuts
Price: $5.90
Click images to enlarge
High quality stainless steel plate which is 2.5mm thick.
OD is 180mm. ID of centre hole is 38mm.
Brake Plate for Drifta Go Karts, Grass Karts, Drift Trikes , Trolley's or Ideal for any DIY project.
Compatible with our Right Hub Brake & Rear Axles.
Price: $32.00
Click images to enlarge
Brake Disc Plate complete with Right Hub.
High quality stainless steel plate which is 2.5mm thick.
OD is 180mm.
ID of centre hole of Brake Plate is 38mm.
Comes complete with bolts.
To suit our Drifta Go Karts, Grass Karts, Drift Trikes , Trolley's.
Ideal for any DIY project. Compatible with our Rear Axles.
Price: $60.00
Click images to enlarge
25mm distance between 6 bolt holes which are 5mm.
Inside diameter is 25mm with splines.
These are compatible with our Rear Axles 880mm & 980mm with splines.
OD of flange is 60mm. Height of Right Hub Brake is 45mm.
Right Hub Brake for Drifta Go Karts, Grass Karts, Drift Trikes , Trolley's or ideal for any DIY project.
Compatible with our brake plate.
Price: $30.00
Click images to enlarge
REAR DISC BRAKE ASSEMBLY
Cable operated caliper comes complete with brake pads.
Mechanical cable brake.
Suitable for 2.5-3mm brake disc plate.
Distance between mounting bracket holes centre to centre is 52mm.
Suitable for Grass Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Price: $30.00
Click images to enlarge
To suit REAR DISC BRAKE ASSEMBLY.
(Mechanical cable brake system).
Rear Disc Brake Assembly pictured above.
Please note: Some brake pads for this brake assembly are rectangular shape. Please specify when ordering if you need the rectangular pads.
Price: $8.00
Click images to enlarge
To suit smaller Go Kart Hydraulic brake units. (Not Xtreme Hydraulic brake units)
(Please note: this smaller unit is now obsolete)
Please note: Go Kart frames starting with serial # ZJLH had this smaller brake unit.
Price: $12.00
Click images to enlarge
Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.
To suit butterfly steering wheels on Drifta Go Karts.
Brake hose length 140cm from caliper to handle. Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)
Easy to install, Just bolt on.
Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.
Price: $69.00
Click images to enlarge
HYDRAULIC BRAKE PADS (SET OF 2)
To suit Standard Hydraulic Brake Unit Complete With Hand Lever (pictured above) and Go Kart frames starting with serial # LAKS.
(Code YL-F328)
Price: $12.00
Click images to enlarge
Available in different colours of go karts.
To suit Standard Hydraulic Brake Unit Complete with Hand Lever - LAKS serial.
Mounting holes are 40mm apart, holes drilled to suit brake caliper above.
Price: $20.00
Click images to enlarge
XTREME HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER
Suitable for 2.5-3mm brake disc plate.
Brake hose length 160cm from caliper to handle.
To suit brake units for Go Kart frames starting with serial # ZJLH. (These are not the standard unit for our Drifta Go Karts with serial # LAKS... They can be used if adapted with a replacement brake bracket.)
For ZJLH... or LW-GK Drift Go Karts 2013 or older you will need a brake bracket to attach these brake units.( The original brake units on these karts are now obsolete)
These Xtreme Brake Units are ideal if you are building your own kart.
Suitable for Drift Go Karts, Grass Karts, Off Road Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.
Comes complete with Xtreme Hydraulic Brake Pads
These brake pad codes below will fit this brake unit:
Code TL-F305
Code RH-7067
Code WF-021
Price: $75.00
Click images to enlarge
XTREME HYDRAULIC BRAKE UNIT COMPLETE SUITABLE FOR FOOT PEDAL
These are designed for use with Foot pedals.
Brake hose length 125cm from caliper to handle.
Comes complete with Xtreme Hydraulic Brake Pads
(Code TL-F305) or (RH-7067) or (WF-021)
Compatible with our 2.5-3mm Brake Disc Plate
Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes,Trolley's or Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.
Price: $95.00
.jpg "XTREME HYDRAULIC BRAKE PADS (2 PCS) 1 x SET")
Click images to enlarge
XTREME HYDRAULIC BRAKE PADS (2PCS) 1 x SET
To suit Xtreme Hydraulic Brake Units (hand lever or foot units)
Code on brake pads can be:
TL-F305
RH-7067
WF-021
Price: $15.00
Click images to enlarge
Use this to mount Xtreme Brake Units to chassis.
PCD 65mm
Price: $10.00
Click images to enlarge
190mm Length
Compatible with Xtreme Hydraulic Foot Brake Unit.
Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.
Price: $22.00
Click images to enlarge
WHEEL RIM DRIFT Go Kart 13*5-6
172mm Diameter x 98mm Width
Bolt hole diameter 10mm
To suit tyres 13*5-6
(Our Sportz, Trail Blazer, Caged, and Honda Drifta Go Karts )
Price: $25.00
Click images to enlarge
WHEEL RIM DRIFT Go Kart 145/70-6
172mm Diameter x 114mm Width
To suit tyres 145/70-6
(Our Blazer, Ultimate and Xtreme Drifta Go Karts)
Price: $28.00
Click images to enlarge
WHEEL RIM DRIFT Go Kart 7"
200mm Diameter x 132mm Width
To suit 15*5-7 and 16*8-7 tyres.
Price: $30.00
Click images to enlarge
Size 13*5-6.
Inflated 290mm Diameter x 120mm Wide.
Tubeless
To suit WHEEL RIM DRIFT Go Kart 172mm Diameter x 98mm Width
These tyres will fit our Sportz, Caged, Honda, Junior, and Trail Blazer Drifta Go Karts.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Price: $28.00
Click images to enlarge
BUY 2 FOR DISCOUNT. 13*5-6.
Inflated 290mm Diameter x 120mm wide.
Tubeless.
To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.
These tyres will fit our Sportz, Caged, Honda, Junior, and Trail Blazer Drifta Go Karts.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Price: $50.00
Click images to enlarge
Slick tyre 13*5-6.
Inflated 290mm Diameter x 120mm Wide.
Tubeless.
To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.
These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Awesome for etxra sliding & drifting on grass.
Price: $32.00
Click images to enlarge
BUY 2 FOR DISCOUNT 13*5-6
Inflated 290mm Diameter x 120mm Wide.
Tubeless.
To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.
These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Awesome for etxra sliding & drifting on grass.
Price: $60.00
Click images to enlarge
Tyre size 145/70-6
Inflated 355mm Diameter x 135mm Wide.
Tubeless
To suit WHEEL RIM DRIFT Go Kart 145/70-6
Please note: Tread pattern may vary slightly to image shown.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.
Price: $38.00
Click images to enlarge
BUY 2 FOR DISCOUNT
Tyre size 145/70-6
Inflated 355mm Diameter x 135mm Wide.
Tubeless
To suit WHEEL RIM DRIFT Go Kart 145/70-6
Please note: Tread pattern may vary slightly to image shown.
Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Drift Trikes, Trolley's.
Ideal for any DIY project.
Price: $70.00
Click images to enlarge
Knobbly, Slick or Road tyres Size: 13*5-6
Please specify when ordering which tread type you require.
KNOBBLY, SLICK (smooth), or ROAD
Please note: Slick tread type is in main illustration.
Price: $45.00
Click images to enlarge
BUY 2 FOR DISCOUNT.
Knobbly, Slick or Road tyres 13*5-6.
Please specify when ordering which tread type you require.
KNOBBLY, SLICK, ROAD
Please Note: Road tread type is illustrated.
Price: $85.00
Click images to enlarge
BUY 4 FOR DISCOUNT.
Knobbly, Slick or Road tyres 13*5-6.
Please specify when ordering which tread type you require.
KNOBBLY, SLICK(smooth), ROAD
Please note: Knobbly tread type is in main illustration.
Price: $160.00
Click images to enlarge
Tyre size 145/70-6.
Tubeless.
To suit our Blazer, Ultimate & Xtreme Drifta Go Karts.
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's.
Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.
Please note: Tread pattern may vary slightly to image shown.
Price: $55.00
Click images to enlarge
BUY 2 TO GET DISCOUNT.
Tyre size 145/70-6.
Tubeless.
To suit our Blazer, Ultimate & Xtreme Drifta Go Karts.
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's.
Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.
Please note: Tread pattern may vary slightly to image shown.
Price: $100.00
Click images to enlarge
Tyre size 16*8-7.
Inflated 410mm Diameter x 165mm wide. Tubeless.
Compatible with WHEEL RIM DRIFT Go Kart 7 inch.
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's.
Ideal for any DIY building project.
Ideal if you are modifying your kart, home-built karts or other projects.
Price: $50.00
Click images to enlarge
Tyre size 16*8-7
Tubeless.
Please Note: Tread pattern may vary to image shown.
Rim colour is silver.
Price: $75.00
All our karts are off road leisure go-karts and as no safety standards are available, driving is at your own risk.
Neither the manufacturer nor Go Karts Direct are liable for personal or other damages neither to participating or non-participating persons. At delivery the owner takes full responsibility for the kart and use of the kart. Ensure that the person driving is of an age, size and has the necessary skills and experience to drive the kart safely.
Drivers under 16 must do so only with the permission of their parents, and younger children should be accompanied by an adult at all times.
Website by Acre PC
Copyright © 2015 Go Karts Direct.
All rights reserved. This site, the text, images, and video files herin are the copyrighted works of Go Karts Direct. Reproduction in whole or part, on paper, internet, or other medium is prohibited without the express permission of Go Karts Direct.